會員登陸 賬號： 密碼：
您的當前位置：首頁 >> 產品展示
EXPEARL ET：ET220X、ET220H、ET230X、ET330H、ET350X、ET530H、ET720X
Typical Properties Unit Test Method
Melt Flow Rate g/10min ISO 1872-2
Density g/cm3 ISO 1872-1,2
MA Content wt% JPE Method
Maleic Anhydride Content wt% JPE Method
Tensile Strength at Yield MPa ISO 1872-2
Tensile Strength at Break MPa ISO 1872-2
Tensile Strain at Break % ISO 1872-2
Tensile Strength MPa ISO 37
Flexural Modulus MPa ISO 1872-2
Charpy Impact Strength kJ/m2 ISO 1872-2
Tensile Impact Strength kJ/m2 ISO 1872-2
Tensile Modulus MPa ISO 527-2
Durometer Hardness(Type-D) - ISO 868
Vicat Softening Point ℃ ISO 306
Melting Point ℃ ISO 11357-3
Brittleness Temperature ℃ ISO 974
Preparation Test Specimens
Characteristics
Uses



 

ET220X ET220H ET230X ET330H ET350X ET530H ET720X
8.5 8.0  8.0  10 12 30 80
0.937 0.937 0.943 0.945 0.952 0.945 0.937
8 8 12 16 23 16 8
2.5 2.5 1.0  2.5 2.0  3.8 2.5
No-Yield No-Yield No-Yield No-Yield No-Yield No-Yield No-Yield
No-Break No-Break No-Break No-Break No-Break No-Break No-Break
＞400 ＞400 ＞400 ＞400 ＞400 ＞400 ＞400
11 11 9 8 8 7 8
100 100 57 39 21 36 89
No-Break No-Break No-Break No-Break No-Break No-Break No-Break
180 180 210 210 470 180 140
97 97 54 39 19 37 77
45 45 39 37 31 36 44
79 79 64 54 40 51 67
99 99 88 86 73 86 97
＜-70 ＜-70 ＜-70 ＜-70 ＜-70 ＜-70 ＜-70
Compression Compression Compression Compression Compression Compression Compression
●Adhesioin ●Adhesion
●Small Neck-in		 ●Soft
●Compatibility		 ●Soft
●Adhesion		 ●Soft
●Adhesion
●Transparency		 ●Soft
●Adhesion		 ●Soft
●Adhesion
●High MFR
●Impact/Modifier for Polyamide ●Extrudion Coating ●Impact/Modifier for Polyamide ●Sheet ●Impact/Modifier for Polyamide
●Adhesive		 ●Adhesive film ●Hot-Melt

< 返回 >

利發國際貿易公司?東莞北塑化工有限公司 版權所有(C)2013?網絡支持?中國化工網?全球化工網?生意寶?著作權聲明
備案序號：粵ICP備17000151號-1
 
點擊這里給我發消息
點擊這里給我發消息